 |
 |
 |
 |
 |
 |
 |
| Taig Micro Lathe II |
 |
 |
|
|
|
|
| Taig Micro Lathe II fully assembled |
|
|
|
|
|
|
| Taig Micro Lathe II fully assembled with ER16 Headstock |
|
|
|
|
|
|
| Headstock and tailstock risers - provides a 6 inch swing |
|
|
|
|
|
|
| 3 Jaw 3¼" diameter self-centering Scroll Chuck (steel body) with reversible aluminium soft jaws ¾-16 thread |
|
|
|
|
|
|
| 4 Jaw 3¼" diameter self-centering Scroll Chuck (steel body) with reversible aluminium soft jaws ¾-16 thread |
|
|
|
|
|
|
| 0-¼" Jacobs drill chuck commercial quality 3/8-24 thread |
|
|
|
|
|
|
| 0-¼" Jacobs drill chuck industrial quality 3/8-24 thread |
|
|
|
|
|
|
| Drilling tailstock lever operated 5/8" off set with dead center 3/8-24 thread for drill chucks |
|
|
|
|
|
|
| Polyurethane V-belt (established belt life of 5,000 hours) 12½" flat length |
|
|
|
|
|
|
| 6 Step pulley for headstock spindle |
|
|
|
|
|
|
| Tool Post |
|
|
|
|
|
|
| Quick Change Tool Post with 4 holders |
|
|
|
|
|
|
| Specifically designed mounting board |
|
|
|
|
|
|
| Carriage depth stop |
|
|
|
|
|
|
| Chuck depth stop for workpiece in chuck |
|
|
|
|
|
|
| Lathe dog for turning between centers |
|
|
|
|
|
|
| Collet set: 1/8", 5/32", 3/16", 7/32", ¼", 9/32", 5/16", 1 blank |
|
|
|
|
|
|
| ER16 Collet 12 piece set in wooden stand |
|
|
|
|
|
|
| Full circle soft jaw set for 3 jaw chuck |
|
|
|
|
|
|
| Face plate, 3¼" diameter, ¾-16 thread mount |
|
|
|
|
|
|
| Face plate angle bracket set |
|
|
|
|
|
|
| Face plate for wood turning |
|
|
|
|
|
|
| Tool rest for wood turning |
|
|
|
|
|
|
| 6 Piece high speed steel tool bit set: left hand, right hand, 45 degree chamfer, round nose , boring bar, cut off |
|
|
|
|
|
|
| Cut Off Blade 0.040 x 1/2 inch HSS |
|
|
|
|
|
|
| Die holder for tailstock - accepts 13/16" - 1" die button dies |
|
|
|
|
|
|
| Slitting saw arbor turns the lathe into a very small tablesaw |
|
|
|
|
|
|
| 0.032 x 2½" High speed slitting saw to match |
|
|
|
|
|
|
| Needle bearing centre spring loaded fits in tailstock will work at high speed without burning |
|
|
|
|
|
|
| T-Bar cut off tool height adjustable |
|
|
|
|
|
|
| Grinding wheel arbor turns the lathe into a very small bench grinder useful for sharpening of tool bits and drills |
|
|
|
|
|
|
| Grinding wheel to match |
|
|
|
|
|
|
| Steady rest |
|
|
|
|
|
|
| Milling attachment mounts directly on the crosslide (2 x 3¾" table) adds a third axis to the lathe (z axis) |
|
|
|
|
|
|
| Radius turner - turns ball ends on rods |
|
|
|
|
|
|
| Top slide mounts directly on the crosslide for cutting tapers and tapered bores in the work piece |
|
|
|
|
|
|
| "The Taig Lathe" comprehensive handbook by Tony Jeffree |
|
|
|
|
|
|
| 240V DC Variable speed motor (0 to 2,400 rpm) |
|
|
|
|
|
|
| 2 Step pulley for motor spindle |
|
|
|
|
|
|
| Motor mounting bracket for headstock |
|
|
|
|
|
|
| Mounting bracket spacer |
|
|
|
|
|
|
| Slimline spindle wrench for changing chucks and arbors |
|
|
|
|
|
|
| Calico dust cover |
|
|
|
|
|
|
